Hannah wanted to be Wonder Woman for Halloween. She was absolute about it…for a couple of days. Since then, she has been firm on Sleeping Beauty. Of all the princesses, this is the one I was least wanting to sew. The off the shoulder bodice and the peplum skirt just seemed like a lot of work…and they were. But I’m super excited with the final product. The costume I dreaded most of any costume I’ve made so far, but the one that I might be most proud of in the end.
Since I was really unsure of how I would draft a Sleeping Beauty costume, I scoured the internet for ideas. Not many out there, so I bought the Simplicity 5835 pattern on ebay. Don’t get me started on store bought pattern sizing! Again, a total fail with the sizing. So again, I turned to the trusty Geranium dress pattern and used the Simplicity pattern as a guideline.
I lengthened the bodice a few inches and used a zipper instead of buttons. The zipper was definitely not done in the proper way, but it works for a costume.
For the sleeves, I used a long sleeve pattern I already had. I tried to make a v-shape hem using a facing, but it’s not very obvious. Oh well. It was a last minute thing after I had already attached the sleeves and I was afraid to cut too deep a v shape and make the sleeves too short.
For the peplum skirt, I used the Simplicity pattern as a starting point, then drafted my own. I made it one piece and attached it to the bodice before attaching the skirt. It was a good natural stopping point for the zipper and looked better without a seam down the middle.
And for the off the shoulder look, I decided to do the easiest thing possible. Rather than do anything to change the construction of the bodice to include a fully attached collar piece, I took the easy route and sewed a fabric tube. I gathered it and attached it to the front bodice along the gathering stitches and then attached it to the back of the back bodice, sewing along the zipper seam line. Easy and done.
The crown and necklace were pretty quick and easy. I used the Simplicity patterns but assembled them differently than called for in the pattern. I made the crown one piece instead of two sewn together. I also fused the gold lame fabric to yellow felt using spray ‘n bond instead of using stiff interfacing. Even though the crown is fairly floppy, it stands straight up like it should when worn.
And that’s Hannah as Sleeping Beauty. Phew, done with Halloween sewing! Yipee!
UPDATE: If you want to use an inexpensive but beautiful costume fabric that will stand the test of time, I included links to the fabrics I used. After one year of near constant wear and many washings (oxyclean spray ‘n wash, cold water, gentle cycle), the costume is still in excellent condition and looks almost new! I will only use slipper satin from now on for all costumes. The crown and necklace did not survive long but lasted for Halloween, so they served their purpose.
There is no better basic dress pattern than the Geranium dress pattern from Made by Rae. I have made so many variations of this dress that I’ve lost count–definitely more than ten! And anytime I need to make a dress and I don’t have the right pattern (like this year’s Halloween princess dresses, which you can read about here and here), I just modify the Geranium dress to get what I want. It fits perfectly EVERY SINGLE TIME! My girls have different body types and it still fits them both perfectly.
This Geranium dress was a little bit unplanned. Usually I like to pick a pattern first and then find a fabric that suits the pattern. It was the opposite this time around. I had this fabric from Joann’s that I thought was adorable and just didn’t know what to make with it. I realized that fall is quickly passing us by and so I wanted to make something cute, quick, and easy. The Geranium dress with cap sleeves fit the bill.
I added the red ribbon to break up the mostly neutral tones and to give the dress an added pop. Since I didn’t really have any buttons that matched, I just went with clear buttons. Not the best buttons for the dress, but certainly acceptable. Besides, the ribbon is what I wanted as the main embellishment anyway.
I was a little worried about the large print, thinking it might be overwhelming on such a little dress, but it looks great. And it is especially precious on my sweet Katie, who by the way is getting three teeth right now. Yikes!
When you find a fabric you love it’s hard to part with the scraps, even if they are weirdly shaped and don’t seem usable. When sewing one of my favorite dresses, the Oliver + S family reunion dress (read about it here), I found this FREE felt bow tutorial on the Oliver + S website. Since I loved the fabric I used for the reunion dress so much, I used fusible heat ‘n bond to use up some of my scraps to make an adorable matching bow. And with some new favorite scraps from some recent projects, I decided to revisit the felt bow pattern and to write up a quick tutorial. To make a scrapbuster felt bow you’ll need…
spray ‘n bond fusible adhesive or iron on double sided heat ‘n bond
tailor’s chalk or fabric marker
First, download and print the Oliver + S bow pattern. I printed the two sizes that were mentioned in the tutorial, 100% and 60%. Once you have your pattern cut out, find some felt and fabric scraps that are slightly larger than the pattern pieces.
Spray the WRONG side of your fabric scraps following the directions on the spray can. If you are using fusible heat ‘n bond, same thing. Apply it to the WRONG side of your scraps following the directions on the packaging.
If you are using spray ‘n bond, be very careful and protect the surrounding area. I did it in the garage and placed the scraps on some broken down cardboard boxes. Glad I didn’t attempt this in the house! This was my first time using spray ‘n bond and it sprays much stronger and faster than I anticipated. I wasn’t sure how much to spray. I think I’ll have to experiment a little with this. And honestly, I think for this project the fusible kind might be better and provide a stronger bond.
This is what the back side of my fabric looked like after I sprayed it and let it sit for a few minutes. It has a slightly textured look and feel. Once it’s dry, which is pretty immediate, place the fabric scrap WRONG side down onto your felt scrap.
Use a press cloth to adhere the fabric scrap to the felt scrap following the directions on the spray ‘n bond can or the heat ‘n bond packaging.
Once your fabric scraps are bonded to your felt scraps, use tailor’s chalk or a fabric pen (…or a ball point pen) to trace the pattern. If you plan to wrap the bow center around a headband or a clippie, you may want to make that piece slightly longer than the pattern to give yourself some leeway. You can always cut it shorter later on.
Cut out your pieces…making sure to trim off any pen markings from tracing if you used a ball point pen. Once you have your pieces, follow the Oliver + S tutorial to assemble your bow.
Attach to a headband or a clippie and enjoy! An adorable pattern, and even more adorable with your favorite fabric scraps!
I made a Halloween Junebug dress for Hannah last week, which you can read about here. I wasn’t planning on making another Junebug dress in the near future, especially with more costume sewing to do, but I stumbled upon this print in the clearance section at Walmart. I almost resisted until I saw it was only $3 per yard! Couldn’t pass it up.
I love vintage feedsack prints and it was totally perfect for the classic/vintage look of the Junebug dress. And the piping and large buttons add even more vintage charm. Love it!
When I asked Katie what she wanted to be for Halloween, she said Rella. I was sort of joking when I asked her, thinking she wouldn’t really get it since this will only be her second Halloween, but she seems to understand and has not wavered since I first asked her. Despite Hannah’s daily attempts to get Katie to change her mind for some unknown reason, Cinderella it is.
I intended to use the Simplicity 2563 pattern that I already had, but unfortunately the muslin I made was too wide, even sewing one size down from what Katie normally wears, so I ditched the Simplicity bodice and skirt patterns in favor of the tried and true Geranium dress pattern from Made By Rae. One of the best sewing purchases I’ve ever made!
To alter the Geranium pattern to look more like the Simplicity one, I lowered the neckline on the bodice about an inch or so to make it more of a scoopneck.
I also made the front bodice two pieces so that there would be a seam in the center front. To do this, I simply added a seam allowance to the fold line of the Geranium pattern, cut two, then sewed them together to create a front bodice with a center seam.
I didn’t do the pointed base on the bodice like the Simplicity pattern because I didn’t want to fuss with it while attaching the skirt.
The Geranium dress does not include a sleeve pattern, so I used the Simplicity sleeve pattern and followed the Simplicity elastic casing guidelines. I’ve done this before and it’s always turned out perfectly.
For the puffs around the waist, I used the Simplicity pattern piece. They are simply large circles folded in half, gathered along the curved edge, and then basted to the bodice before attaching the skirt. Having the seam in the front of the bodice helps to line up the puffs in the exact center of the dress. A bonus to adding the extra step.
And finally, the Simplicity headband and a grosgrain ribbon necklace to complete the look.
And there you have it, miss Katie as Rella. She is one happy girl!
Our first fall in Nashville has been really great. I’m enjoying our new house and all of the fall related decorating, which you can read about here and here. I’m super excited about my Halloween sewing projects too. These dresses are the first on my to-do list with costumes to come very soon.
In this sweet sister pic, Hannah is wearing a Junebug dress and Katie is wearing a Sally dress. (I promise this is the last Sally Dress for awhile! As much as I LOVE that pattern, I’m starting to experience some Sally overload…)
While I’d love for you to be amazed at how productive I am in pumping out dresses, in all honesty, I sewed this Sally dress for Hannah last year. My mom sent me the fabric (I think it was from Joann’s?) but I didn’t know what to do with it. I wasn’t sure that it would work for a girl’s dress but I had just bought the Sally dress pattern and was itching to make one. I figured if it didn’t turn out, I just wouldn’t have Hannah wear it. But I LOVED it!
Here is a Hannah throwback. This was taken at Lemos Farm in Half Moon Bay, California last year. Hannah and Katie’s first time visiting a real pumpkin patch! Although Katie was fairly young at the time and obviously won’t remember it…
Again, one of the very best parts of the Sally dress is the pockets. Nothing better than big pockets, except maybe big pockets with a contrasting/coordinating fabric. So much fun!
For Hannah’s Junebug dress, I used Riley Blake’s Halloween Parade Spider Webs. I really wanted the purple but it was on backorder at fabric.com until November, and I obviously would have no use for it then, so I went with the gray. Thankfully I had some pink buttons on hand because pink is pretty much all Hannah wants to wear these days. The black, white, and gray wasn’t going over too well at first…I think she’s getting over it now… The other day she insisted on wearing neon pink head to toe and could not be persuaded otherwise. Sheesh!
The Junebug dress holds a special place in my heart. This pattern is by Jess from Craftiness is not Optional, my favorite blog of all time! When I was first thinking of learning to sew baby clothes, I found her site and instantly fell in love with the Junebug dress tutorial. I made one using a self drafted pattern, which looked cute but was horribly proportioned and unwearable. I had always wanted to revisit this dress but just haven’t until now. And now there is a pattern, so no more self-drafted patterns this time around! I love the classic look with the buttons on either side of the front placket and the adorable puff sleeves. It doesn’t get much better than this in my book.
There are only two minor downsides to this dress. The first, that I sewed a size 3 instead of a size 2. Hannah is pretty petite for her age and in between the sizes, so it’s a little roomy. Since it’s a Halloween dress, I could have made it a size smaller for a closer fit without worrying about her outgrowing it quickly. Afterall, it will get put away for Katie for next year in a matter of weeks.
The second downside was that it wasn’t as full of a skirt as I typically prefer, which is partially my own fault. I eeked this dress out of only one yard of fabric! Awesome way to maximize yardage and minimize expense, but the result is a slightly slimmer skirt than the pattern calls for. The next time I sew this dress, I’ll likely make it fuller than even the pattern calls for. I prefer a twirlier skirt and I have found that gathers look nicer and more even with more fabric. But it’s a super cute dress and I love it in spite of these two itty bitty regrets!
I finally finished decorating our front porch, and I love it! I started out with the grapevine and felt flower wreath, which you can read about here, and then went from there.
The doormat is from Bed Bath & Beyond. Doesn’t seem to be on their website… I love that it will work for the entire fall season.
The hay bales, the mums, and the mini gourds are all from Home Depot. I bought four small hay bales, placed two on each side, stacked one on top of the other with the bottom hay bale a little bit pushed forward away from the house and the top one resting against the house to create a stair step. Then I scattered the mini gourds over the tops.
The gourds are constantly getting rearranged. My girls love to switch them around and to take them all off and pile them up on the top of the porch steps until I insist that they be put back. Katie loves to run around when I’m not looking with random bumpy ones saying “favorite” trying to bite the bumps off until I catch her and convince her that it’s yucky and that she should stop.
The mums are still in the pots that they came in, which I then put into inexpensive baskets from Michael’s to dress them up a little.
The Martha Stewart dimensional silhouette bats were originally on the door, as you can see here. I used the glue dots included in the package but they didn’t survive the afternoon. I then used a little bit of hot glue on the dots thinking that might do the trick. Sadly, no. I wasn’t sure what to do with the bats until a few days later when we had a thunderstorm and a bunch of smallish branches fell from our two large trees in the front yard. While gathering them to put with our yard waste, I realized that they would be perfect for the bats and FREE. A little hot glue and done. No falling off this time. I was originally sad that the bats didn’t stick to the door because I really loved the way that looked, but I think they look way better on the branches!
And the final addition were the pumpkins. A $20 score from our church’s first annual pumpkin patch. Hannah picked them all out except for one. They aren’t really carving size. We might just do stickers at some point and call it good. They’ll last longer that way anyway.
I think the porch is complete. I’m really tempted to make some of these lanterns or these ones to line our walkway, but I’m nervous about using glass mason jars with our kids running around outside. Maybe just for the week of Halloween, or maybe next year…